![create bom in solidworks with part pictures create bom in solidworks with part pictures](https://www.openbom.com/wp-content/uploads/2019/10/solidworks-openbom0.jpg)
Column 4, Description, allows the creator to put a small description of the part so the reader knows what the item is. The last two columns of the example Bill of Materials shown in Figure 1 provide important details to the reader. So if one were to virtually fit a box around the ‘56’ circled in figure 2, its leftmost bottom corner would have to be located in area D4. Note that when specifying locations on a drawing, the bottom leftmost side of a box fitted around the object is used. Starting in zone D (shown as letters in the left hand side of the drawing) then going across the page to zone 4 (shown as numbers at the top of a drawing) a balloon callout showing Item 56 can be found. Using sheet 5 (SH5), shown in Figure 2, we can locate the part. In the example provided in Figure 1, Item 56 is said to have at least one of the parts on sheet 5 in area D4. However, having this in place makes the drawing much more readable and useful in finding exactly where the components are located. Some will have a tendency to leave this information out. This provides the reader to the exact location of the component in the print. On the drawing for that specific part, you would then show the suppliers part number for that raw unmodified component. If you are purchasing an item off the shelf (COTS – commercial off the shelf) and then are modifying that item by the addition of a hole for example, you would use an internal part number.
![create bom in solidworks with part pictures create bom in solidworks with part pictures](http://4.bp.blogspot.com/-7jBXuo3g9no/VRXCIHKaBlI/AAAAAAAABek/p5QLfvQU89o/s1600/009%2B-%2Bimage%2B1.png)
The part number may be an internal part number specific to your company or an external part number of a purchased item. The second column is straight forward and displays the part number of the component. This is a simple counting of each unique component in an assembly. Starting off the first column, one sees the item number of the part. Figure 1 shows a single line of a Bill of Materials. This helps automate the process, reduce chances for error and allows for automatic updates as assemblies change.Ī BOM is used to fully identify each piece of a larger assembly in a concise way.
CREATE BOM IN SOLIDWORKS WITH PART PICTURES SOFTWARE
Modern CAD software (Like SolidWorks – shown in the images below) all have automated means to generate BOMs. A solution to this is to add a Bill of Materials or BOM to the drawing. Manually labeling everything in an assembly drawing can take days and it is very easy for not all the detail to be captured. It is a task that cannot be ignored, as a well-defined assembly drawing is necessary to properly convey critical details. Fully defining large assemblies can be a daunting task.